AutoVent 2000/3000 Automatic Transport Ventilator

The first ventilator designed expressly for the EMS professional, the AutoVent 2000 provides independent controls for tidal volume and BPM. The AutoVent 3000; with additional inspiratory time settings; offers an even wider range of patient applications to meet most critical emergency care situations. Both models are designed to meet ventilator needs in a variety of applications, from intra– and inter-hospital transports to sophisticated air rescue. Automatic transport ventilators have been recommended by the American Hospital Association as the preferred equipment to provide ventilator support in the pre-hospital setting.

The AutoVent 2000/3000 uses state-of-the-art pneumatics to assure reliable, time-cycled constant flow ventilation powered by a minimum of source gas. Both models may be used with all models of the LSP single patient use ventilation circuits as an added protection against patient cross-contamination.

Each AutoVent is accompanied by the proven LSP patient valve with its bright green visual breath indicator, built-in audible pressure limit alarm, and intermittent mandatory ventilation providing gas flow for spontaneous breathing patients. The patient valve is available with an anti-inhalation valve for use in toxic environments.

Features and Benefits

• Small, compact, and transport ready.
• Designed to perform in harsh and toxic environments.
• Assembles quickly with simplified operating instructions printed on the case.
• Impact-resistant case with shock-absorbing bumpers and recessed control settings.
• Rate and volume settings independently operated.
• Easy-to-monitor patient valve assembly and toxic atmosphere valve are able to deliver additional breaths on demand by inspiratory effort of the patient.
• Operates exclusively on standard 50 psi source gas, eliminating air entrainment and maintaining the integrity of the specified oxygen concentration.
• Operates at extreme temperatures ranging from 0° F to 125° F.
• Pneumatically powered; batteries not required.
• Allows for PEEP attachment.
• Meets ASTM, ISO and KKK-1822C standards.

Technical Specifications

Control Modules:

• Supply Pressure Range: 40-60 psig
• Operating Temperature: 0° F to 125° F
• Storage Temperature: -40° F to 160° F
• Frequency (AutoVent 2000): 8 to 20 BPM
• Frequency (AutoVent 3000): 8 to 28 BPM
• Tidal Volume (AutoVent 2000): 400 to 1200 ml.
• Tidal Volume (AutoVent 3000): 200 to 1200 ml.
• Flow Rate: 16 to 48 LPM
• Inspiratory Time (AutoVent 2000): approx. 1.5 or 2.0 seconds
• Inspiratory Time (AutoVent 3000): approx. .75, 1.5, or 2.0 seconds
• Expiatory Time: 1.5 to 6.0 seconds
• I:E Ratio: 1:1 to 1:4
• Weight: 24 o.z./680 g.]
• Dimensions: 6″ W x 1-3/4″ D x 3 1/2″ H
• Case Material: Polyester
• Input Connection: Plated Brass
• Output Connection: Plated Brass
• Minute Volume: 0 to 24 LPM
• Gas consumption: 0.5 lpm maximum
• Driving Gas: 0.5 LPM Maximum

Patient Value Assembly

• Flow: As required in demand mode: 0-48 lpm at 50 psig
• Peak Inspiratory Flow: 48 lpm at an airway pressure drop of less than 2.5 cm H20
• Delivery Pressure: 60±5 CM H20
• (Insp.) Crack Pressure 0 to -2 CM H2O (0 to – .8 in. H2O)
• Exhalation Resistance:
  • LPM: 0-10; cm H2O (max): 1.5
  • LPM: 11-70; cm H2O (max): 3.8
• Gas Consumption Driving Gas: 0.5 lpm maximum
• Dead Space: 8 ml (excluding mask)
• Supply Pressure: 40° to 60° psig
• Operating Temperature 0° F to 125° F
• Storage Temperature: -40° F to 125° F
• Inlet Fitting: standard male oxygen DISS
• Filter: 25 micron stainless steel mesh
• Outlet: 22 mm outside diameter x 15 mm inside diameter; fits standard medical masks, endotracheal tubes, and tracheostomy tubes
• Weight: 16 oz (450 grams)
• Materials: body – anodized aluminum; cover – polycarbonate; outlet fitting – polycarbonate; inlet fitting – plated brass

Warranty Information

• 1-Year Warranty