Dental Scanner


      View as: Grid List

      Results 1 of 2

      • Sale
        Quick View

        3Shape’s D700 series scanners are for medium to large labs where
        productivity and flexibility are the key criteria. The Scanner comes
        with “Dental System Premium”
        3Shape’s unique 2-camera and 3-axis motion system
        2 cameras with reduced angle enable impressions,deep inlays, and full
        undercuts to be scanned effectively.
        The 3-axis motion system allows the dental object to be tilted,
        rotated, and translated, facilitating scanning from any viewpoint and
        enabling scanning of more than 350 degrees of a sphere.
        Scan parameters are automatically adjusted to the object’s material
        for accurate color capture.
        Scan time (Final 3D model)      Single die: 25 sec (30 sec), Full model: 60
        sec (75 sec)
        Resolution      2 cameras, 1.3 Mega Pixels
        Accuracy        High accuracy: < 20 Microns
        Material color  Material color independent
        Scan indications        Market’s most extensive range.
        Dimensions (W x H x D)  34 x 29 x 33cm (14″ x 11″ x 13″)

        Scanning the market’s most extensive range of dental indications
        Antagonist model, Pre-preparationImpression scanning (Add-on
        Module)Model builder for impression and intraoral scans (Add-on
        Module)Single copingBridge frameworkAnatomical copings and
        frameworkFull anatomical crownFull anatomical bridgeSingle wax up/ Wax
        up bridgeInlay / Onlay / Inlay bridgeVeneersOver-press crowns and
        bridgesPost & coreTelescopeCustomized abutments (Add-on Module)Implant
        bars and bridgesRemovable partial design (Add-on Module)Orthodontics
        module (Add-on Module

        $7,500.00 $4,950.00
        Add to cart
      • Sale
        3shape D710 3D Dental Scanner
        Quick View

        3Shape’s D710 series scanners are for medium to large labs where
        productivity and flexibility are the key criteria. The Scanner comes
        with “Dental System Premium”.
        High speed scanning
        The D710 is optimized for scanning both impression and gypsum models
        and enables high throughput for both standard and advanced
        Its that easy
        These advanced dental scanners are so easy to use that extra staff
        training is hardly required. Object fixation is quick, and a single
        click in the software starts the scan.

        Scanning the market’s most extensive range of dental indications
        Antagonist model, Pre-preparation
        Impression scanning (Add-on Module)
        Model builder for impression and intraoral scans (Add-on Module)
        Single coping
        Bridge framework
        Anatomical copings and framework
        Full anatomical crown
        Full anatomical bridge
        Single wax up/ Wax up bridge
        Inlay / Onlay / Inlay bridge
        Over-press crowns and bridges
        Post & core
        Customized abutments (Add-on Module)
        Implant bars and bridges
        Removable partial design (Add-on Module)
        Orthodontics module (Add-on Module)
        Multi-Die scanning

        Scan Indication Fixtures
        3Shape has designed special accessories for your scanners to ensure
        fast, problem-free, and precise scans with high quality digital data
        for even the most complex indication types.
        The impression fixture – Enables automatic alignment of upper and
        lower when scanning triple-tray impressions. The impression is fixed
        in a permenant position in the flippable holder. The scanner and
        software can recreate the precise upper and lower relationship in the
        digital model.
        The wax-up fixture – enables scanning of wax-ups and bits from all
        angles and sides. The wax-up is suspended in wires that will be
        invisible in the scan result.
        Two-cast fixture – enables users to firmly set 2 models, preparation
        and antagonist, in occlusion so they do not move during scanning. The
        Two-cast fixture functions like a clamp making it easy to set while
        holding the models in occlusion.

        Jumpstart the digital design process
        Impression scanning, including intra oral, is storming ahead in
        today’s dental arena and represents a technology that must be
        considered when investing in a new scanner. Gypsym-only scanners may
        not represent the most future-secure choice. 3Shape’s 3D scanners can
        scan both gypsym models and impressions with fast adaptive impression
        scanning, at times below 2 minutes.

        Impression scanning reduces turnaround time
        Direct scanning of silicone and alginate impressions enables labs to
        start CAD design immediately and manufacture model, coping and crown
        in parallel.

        Enhancing accuracy with direct scanning of impressions
        Impression scanning eliminates inaccuracies that can occur when
        producing a plaster model from a physical impression.

        Impression scan to virtual model
        Turn the impression scan to a virtual model by applying tools for
        articulation, trimming of scan, base creation, sectioning of
        preparations (preserving gingiva), and articulator interface.

        3Shape – leading impression scanning technologies
        3Shape’s patented adaptive scanning technology, combined with the
        scanner’s 3-axis motion and 2 cameras with reduced angle, facilitate
        the unique impression scanning capability. Adaptive scanning
        intelligently detects incomplete areas and automatically builds
        adaptive scan sequences for capturing full object geometry

        $8,800.00 $5,500.00
        Add to cart
      • Sale
        Bundle DAVID SLS-3 3D Scanner
        Quick View
        Bundle Deal: DAVID SLS-3 3D Scanner + TT-1 turntable + FREE DSL-1 desk scan lever This advanced 3D scanner enhances the well proven structured-light-technology with way better handling. A single click in the well proven DAVID software starts the scanning process and a few seconds later the digitized 3D model appears on the screen - [...]
        $2,500.00 $1,800.00
        Add to cart
      • Sale
        Quick View

        Single Appointment Dental Care
        Most dental restorative methods require more than one visit to the dentist. This means that on the first visit, you get an injection of anaesthesia, your tooth prepared, an impression taken, and a temporary restoration put on your tooth. You make a second appointment for a couple of weeks later, get another injection, have the temporary pried off (if it hasn’t fallen off already), and have a permanent restoration put on. With CEREC, the procedure is done in a single appointment, start to finish. No temporary restorations. Now with CEREC Omnicam,MC XL Inlab milling unit and sinter and crystallisation ovens, 3-4 unit bridges can be fabricated in a day.
        Finest Dental Materials
        A CEREC tooth restoration isn’t just convenient, it is also healthy. Many years ago, dentists had few options to repair decayed and damaged teeth other than amalgam, gold, and other metals. With CEREC, your dentist can use strong, tooth coloured ceramic materials to restore your teeth to their natural strength, beauty, and function. These materials closely match the composition of natural tooth structure. The materials are chemically bonded to your tooth, so your dentist can save as much healthy tooth tissue as possible while providing you with a dental restoration that strengthens your tooth. Using metal free materials that are the closest to your natural enamel, CEREC gives you the highest quality restorative care.
        Smile Enhancement
        We use CEREC for more than just crowns. CEREC Omnicam and the MC XL inlab milling unit is capable of producing any single tooth restoration, implant abutments and up to 9 unit bridges. Chipped or discoloured front teeth can be repaired with beautiful CEREC porcelain anterior crowns or veneers. Your smile makes a lasting first impression. Enhance it with CEREC.
        Your dentist is in complete control of the final result
        Since the crown, inlay, onlay or veneer is designed and fabricated from start to finish by your dentist, he has total control over how it will look and fit.
        No temporary restorations
        With Cerec your restorations are placed in a single appointment. If you have lab made veneers you would require temporary veneers during the wait whilst your new teeth are being made by the technician. These have been known to fall off and cause problems. This step is eliminated with CEREC restorations.


        Crystallisation, characterisation and glaze ovens
        In certain circumstances it may be necessary to customise your restorations to blend in with your natural neighbouring teeth. This is accomplished by adding colouring stains to your restoration and firing it in an oven before the final glazing is done.
        Glazing gives the restoration a very smooth and shiny surface texture, enhancing optimum oral hygiene.
        Sinter ovens are used to harden and bake zirconium materials for implant abutments and bridge frameworks.

        $12,500.00 $9,800.00
        Add to cart
      • Sale
        Quick View
        APOLLO DI: The APOLLO DI features easy handling, precise imaging, and the proven Sirona Connect workflow. The impression system includes an imaging unit, APOLLO Connect software, and the APOLLO DI intraoral camera,with which users can make digital impressions of the clinical situation in a seamless workflow. To do this, a moisture-insensitive high-contrast spray is sprayed [...]
        $8,500.00 $6,200.00
        Add to cart
      • Sale
        Quick View
        Details & Specifications Operating System: Windows 7 Professional 64-Bit PC Hardware V2.2.3 Specs: NVIDIA GeForce GTX 650 Ti & GTX 660Ti graphics cards, Intel i7 3930K CPU @ 3.2 GHz & 16GB RAM CEREC SW: 4.3, Connect 4.4, Open Galileos Implant Number of Mills: 772 Manufacturer warranty through 4/2/2020 (with Service Club membership). Service Clubwas cancelled effective 4/13/16 Accessories: [...]
        $12,500.00 $8,500.00
        Add to cart
      • Sale
        Quick View

        The CEREC Bluecam is a handheld acquisition camera that uses a highly visible blue-light LED (light emitting diode) to capture digital impressions. Sirona’s CEREC Bluecam provides the user with several advantages. According to the manufacturer, the CEREC Bluecam captures more detail than any other camera on the market. In addition, the CEREC Bluecam acquires images automatically. Users can simply position the lens over the desired area and let CEREC Bluecam do the rest. CEREC Bluecam senses when the area is in focus and automatically captures the digital impression without user intervention, providing easier and shorter acquisition times.

        CEREC Bluecam offers precision thanks to a uniform field of illumination. The optics used in the camera have been optimized for a higher depth of field and accuracy, and they have been coupled with increased computing power, providing crisp, detailed impressions for precise 3D digital models.

        The speed of capture with the CEREC Bluecam is exceptional. Users can capture a half-arch digital impression in 40 seconds and a full-arch digital impression in just 2 minutes. An integral part of the CEREC AC, the CEREC Bluecam makes digital impression capture easy and efficient.

        $8,000.00 $6,000.00
        Add to cart
      • Sale
        Quick View

        Sirona’s Omnicam camera is THE best camera system on the market. Its benefits include superior handling and ergonomic design, powder-free scanning and provides precise 3D images in natural color.The Sirona MC XL milling unit was the only chairside option available to dentists from 2007-2013. It is comparable to today’s MC X milling unit and can perform the full spectrum of chairside indications including inlays, onlays, crowns, veneers, abutments and 4 unit bridges. The average milling time for a single unit restoration is between 10-14 minutes. Ivoclar Vivadent’s Programat CS oven is the most popular ceramic and crystallization furnace among dentists. The furnace features 20 programs, is very easy to use and occupies very little space in the dental office. When used with the vacuum function, it can perform more complex firing cycles with high-quality results. The current owner purchased this system from his sister, who retired from practice. After trying it out for a month he prefers his existing CAD/CAM system. This system was tested and calibrated on 7/13/16. A valid Patterson change in ownership form will accompany this sale.

        Accessories: Omnicam/MC XL Calibration Kits, Hoft & Wessel wireless radios, 19 burs, spare block screws, bur/block wrenches, 4 spare water filters, water filter tool, 97 e.max blocks, CEREC Blocs Starter Kit (full), Ivoclar Vivadent CAD/CAM Starter Kit, 1 full bottle of Dentatec milling oil, e.max Stain and Glaze Starter Kit, preventive maintenance kits, Programat Firing Tray Kit, Crystallization Tray, marketing materials, training booklets, vacuum pump (for Programat CS) and hospital grade power cords for all.


        $22,000.00 $18,500.00
        Add to cart
      • Sale
        Quick View


        • Operating System: Windows 7 Professional 64-Bit
        • PC Hardware KA
        • Specs: MSI GeForce N9800GT graphics card, Intel Core 2 Quad Q9400 CPU @ 2.67 GHz & 4 GB RAM 
        • CEREC SW: 4.4, Connect 4.4, Open Galileos Implant
        • Number of Mills: 1,495
        • Service Club is active
        • Accessories: Bluecam/MC XL Calibration Kits, Hoft & Wessel wireless radios, 4 burs, 2 block screws, bur/block wrench, 37 CEREC Blocs, partial bottle of Dentatec milling oil, 2 Powder Pros, 4.4/4.3/4.0 SW CDs, misc maintenance CDs, and hospital grade power cords for all.


        $15,000.00 $12,800.00
        Add to cart
      • Sale
        Quick View

        CEREC AC is the digital impression system for the dental practice.
        Digital scanning with CEREC is easy: acquire an image of the preparation and opposing jaw with the CEREC Omnicam or the CEREC Bluecam. Just a few clicks are needed to draw the preparation margin. The software assists you with marking and supports you with a pivoting 3D view.

        Sirona has two camera solutions: CEREC Bluecam and CEREC Omnicam
        CEREC Omnicam – scanning simplicity:

        The CEREC Omnicam is designed to feel natural to hold: taking digital impressions has never been so easy, intuitive and ergonomic.

        The benefits of CEREC Omnicam:
        Unrivalled handling
        Powder-free scanning
        Precise 3D images in natural color

        CEREC Omnicam is optimized for powder-free scanning of natural tooth structures and gingiva. Simply place the camera over the relevant area and the scan starts automatically. The elimination of a powder coating means that the scanning process is easier to learn. Full-arch and half-arch scans can now be performed more conveniently and quickly than ever before.

        It is impressive to see how the 3D model is constructed during the scan on the  in full color on the monitor. The various surfaces are shown in their natural shades. This direct and realistic feedback helps you navigate your way around the oral cavity and enables you to distinguish between amalgam, gold or composite and allows you to view the differentiation between the preparation margin and gingiva.

        $8,500.00 $5,500.00
        Add to cart
      • Sale
        Quick View
        The inLab MC XL milling and grinding unit opens up the widest possible range of production options for your dental laboratory. You profit from high speed and precision. You can switch from grinding to milling in just a few simple steps. And thanks to the large milling volume and broad spectrum of applications, you will [...]
        $9,800.00 $6,900.00
        Add to cart
      • Sale
        Quick View
        Sinter and Glaze with CEREC SpeedFire Full contour zirconia restorations in one session. CEREC SpeedFire is the smallest and fastest sintering furnace on the market and can sinter a crown in typically 10–15 minutes. The strengths of full contour zirconia can thus also be used for chairside treatment. If required, a glaze can be applied [...]
        $5,500.00 $3,350.00
        Add to cart

      Results 1 of 2