Dental Scanner CAD/CAM + Milling Machine
Single Appointment Dental Care
Most dental restorative methods require more than one visit to the dentist. This means that on the first visit, you get an injection of anaesthesia, your tooth prepared, an impression taken, and a temporary restoration put on your tooth. You make a second appointment for a couple of weeks later, get another injection, have the temporary pried off (if it hasn’t fallen off already), and have a permanent restoration put on. With CEREC, the procedure is done in a single appointment, start to finish. No temporary restorations. Now with CEREC Omnicam,MC XL Inlab milling unit and sinter and crystallisation ovens, 3-4 unit bridges can be fabricated in a day.
Finest Dental Materials
A CEREC tooth restoration isn’t just convenient, it is also healthy. Many years ago, dentists had few options to repair decayed and damaged teeth other than amalgam, gold, and other metals. With CEREC, your dentist can use strong, tooth coloured ceramic materials to restore your teeth to their natural strength, beauty, and function. These materials closely match the composition of natural tooth structure. The materials are chemically bonded to your tooth, so your dentist can save as much healthy tooth tissue as possible while providing you with a dental restoration that strengthens your tooth. Using metal free materials that are the closest to your natural enamel, CEREC gives you the highest quality restorative care.
We use CEREC for more than just crowns. CEREC Omnicam and the MC XL inlab milling unit is capable of producing any single tooth restoration, implant abutments and up to 9 unit bridges. Chipped or discoloured front teeth can be repaired with beautiful CEREC porcelain anterior crowns or veneers. Your smile makes a lasting first impression. Enhance it with CEREC.
Your dentist is in complete control of the final result
Since the crown, inlay, onlay or veneer is designed and fabricated from start to finish by your dentist, he has total control over how it will look and fit.
No temporary restorations
With Cerec your restorations are placed in a single appointment. If you have lab made veneers you would require temporary veneers during the wait whilst your new teeth are being made by the technician. These have been known to fall off and cause problems. This step is eliminated with CEREC restorations.
Crystallisation, characterisation and glaze ovens
In certain circumstances it may be necessary to customise your restorations to blend in with your natural neighbouring teeth. This is accomplished by adding colouring stains to your restoration and firing it in an oven before the final glazing is done.
Glazing gives the restoration a very smooth and shiny surface texture, enhancing optimum oral hygiene.
Sinter ovens are used to harden and bake zirconium materials for implant abutments and bridge frameworks.Add to cart
SaleAPOLLO DI: The APOLLO DI features easy handling, precise imaging, and the proven Sirona Connect workflow. The impression system includes an imaging unit, APOLLO Connect software, and the APOLLO DI intraoral camera,with which users can make digital impressions of the clinical situation in a seamless workflow. To do this, a moisture-insensitive high-contrast spray is sprayed [...]Add to cart
The CEREC Bluecam is a handheld acquisition camera that uses a highly visible blue-light LED (light emitting diode) to capture digital impressions. Sirona’s CEREC Bluecam provides the user with several advantages. According to the manufacturer, the CEREC Bluecam captures more detail than any other camera on the market. In addition, the CEREC Bluecam acquires images automatically. Users can simply position the lens over the desired area and let CEREC Bluecam do the rest. CEREC Bluecam senses when the area is in focus and automatically captures the digital impression without user intervention, providing easier and shorter acquisition times.
CEREC Bluecam offers precision thanks to a uniform field of illumination. The optics used in the camera have been optimized for a higher depth of field and accuracy, and they have been coupled with increased computing power, providing crisp, detailed impressions for precise 3D digital models.
The speed of capture with the CEREC Bluecam is exceptional. Users can capture a half-arch digital impression in 40 seconds and a full-arch digital impression in just 2 minutes. An integral part of the CEREC AC, the CEREC Bluecam makes digital impression capture easy and efficient.Add to cart
Sirona’s Omnicam camera is THE best camera system on the market. Its benefits include superior handling and ergonomic design, powder-free scanning and provides precise 3D images in natural color.The Sirona MC XL milling unit was the only chairside option available to dentists from 2007-2013. It is comparable to today’s MC X milling unit and can perform the full spectrum of chairside indications including inlays, onlays, crowns, veneers, abutments and 4 unit bridges. The average milling time for a single unit restoration is between 10-14 minutes. Ivoclar Vivadent’s Programat CS oven is the most popular ceramic and crystallization furnace among dentists. The furnace features 20 programs, is very easy to use and occupies very little space in the dental office. When used with the vacuum function, it can perform more complex firing cycles with high-quality results. The current owner purchased this system from his sister, who retired from practice. After trying it out for a month he prefers his existing CAD/CAM system. This system was tested and calibrated on 7/13/16. A valid Patterson change in ownership form will accompany this sale.
Accessories: Omnicam/MC XL Calibration Kits, Hoft & Wessel wireless radios, 19 burs, spare block screws, bur/block wrenches, 4 spare water filters, water filter tool, 97 e.max blocks, CEREC Blocs Starter Kit (full), Ivoclar Vivadent CAD/CAM Starter Kit, 1 full bottle of Dentatec milling oil, e.max Stain and Glaze Starter Kit, preventive maintenance kits, Programat Firing Tray Kit, Crystallization Tray, marketing materials, training booklets, vacuum pump (for Programat CS) and hospital grade power cords for all.Add to cart
Add to cart
- Operating System: Windows 7 Professional 64-Bit
- PC Hardware KA
- Specs: MSI GeForce N9800GT graphics card, Intel Core 2 Quad Q9400 CPU @ 2.67 GHz & 4 GB RAM
- CEREC SW: 4.4, Connect 4.4, Open Galileos Implant
- Number of Mills: 1,495
- Service Club is active
- Accessories: Bluecam/MC XL Calibration Kits, Hoft & Wessel wireless radios, 4 burs, 2 block screws, bur/block wrench, 37 CEREC Blocs, partial bottle of Dentatec milling oil, 2 Powder Pros, 4.4/4.3/4.0 SW CDs, misc maintenance CDs, and hospital grade power cords for all.
CEREC AC is the digital impression system for the dental practice.
Digital scanning with CEREC is easy: acquire an image of the preparation and opposing jaw with the CEREC Omnicam or the CEREC Bluecam. Just a few clicks are needed to draw the preparation margin. The software assists you with marking and supports you with a pivoting 3D view.
Sirona has two camera solutions: CEREC Bluecam and CEREC Omnicam
CEREC Omnicam – scanning simplicity:
The CEREC Omnicam is designed to feel natural to hold: taking digital impressions has never been so easy, intuitive and ergonomic.
The benefits of CEREC Omnicam:
Precise 3D images in natural color
CEREC Omnicam is optimized for powder-free scanning of natural tooth structures and gingiva. Simply place the camera over the relevant area and the scan starts automatically. The elimination of a powder coating means that the scanning process is easier to learn. Full-arch and half-arch scans can now be performed more conveniently and quickly than ever before.
It is impressive to see how the 3D model is constructed during the scan on the in full color on the monitor. The various surfaces are shown in their natural shades. This direct and realistic feedback helps you navigate your way around the oral cavity and enables you to distinguish between amalgam, gold or composite and allows you to view the differentiation between the preparation margin and gingiva.Add to cart
SaleThe inLab MC XL milling and grinding unit opens up the widest possible range of production options for your dental laboratory. You profit from high speed and precision. You can switch from grinding to milling in just a few simple steps. And thanks to the large milling volume and broad spectrum of applications, you will [...]Add to cart
SaleSinter and Glaze with CEREC SpeedFire Full contour zirconia restorations in one session. CEREC SpeedFire is the smallest and fastest sintering furnace on the market and can sinter a crown in typically 10–15 minutes. The strengths of full contour zirconia can thus also be used for chairside treatment. If required, a glaze can be applied [...]Add to cart